How to Setup Mobility Print for Mac

Step-by-step guide to setting up Mobility Print macOS

1. To begin, go to System Settings on your Mac

2. Select Printers & Scanners

3. Right-click within the list of printers and select “Reset Printing System” **NOTE: by doing this you will wipe out all printers including those set up for home. If you DO NOT want to do this, click on each individual printer and click “Remove"

4. Confirm by clicking “Reset.” This will wipe all printers from the list.

5. Now, in a new browser window, go to bit.ly/HoldernessPrint and download the driver package by clicking on the green button

**Note: when prompted in the upper right corner select "Keep"

6. Locate the .dmg file and double-click to open it. Then open the .pkg and install it to the device.

6a. Continue

6b. Continue

6c. Agree

6d. Install

6e. Select "Follow_Me_Holderness"

7. Once installed, move the installer to the trash.

8. Go back to Printers & Scanners. You will now see a newly populated list of devices.

9. ***IMPORTANT*** When sending print jobs to a copier, you will always send to FollowME_Holderness. This will allow you to retrieve a job from any copier on campus by swiping in or punching in your ID number.